WE=0, EN=0, PMODE=0, SE=0, INV=0, OPE=0, TRIGM=0, COS=0
CMP Control Register 1
| EN | Comparator Module Enable 0 (0): Analog Comparator is disabled. 1 (1): Analog Comparator is enabled. |
| OPE | Comparator Output Pin Enable 0 (0): CMPO is not available on the associated CMPO output pin. If the comparator does not own the pin, this field has no effect. 1 (1): CMPO is available on the associated CMPO output pin. The comparator output (CMPO) is driven out on the associated CMPO output pin if the comparator owns the pin. If the comparator does not own the field, this bit has no effect. |
| COS | Comparator Output Select 0 (0): Set the filtered comparator output (CMPO) to equal COUT. 1 (1): Set the unfiltered comparator output (CMPO) to equal COUTA. |
| INV | Comparator INVERT 0 (0): Does not invert the comparator output. 1 (1): Inverts the comparator output. |
| PMODE | Power Mode Select 0 (0): Low-Speed (LS) Comparison mode selected. In this mode, CMP has slower output propagation delay and lower current consumption. 1 (1): High-Speed (HS) Comparison mode selected. In this mode, CMP has faster output propagation delay and higher current consumption. |
| TRIGM | Trigger Mode Enable 0 (0): Trigger mode is disabled. 1 (1): Trigger mode is enabled. |
| WE | Windowing Enable 0 (0): Windowing mode is not selected. 1 (1): Windowing mode is selected. |
| SE | Sample Enable 0 (0): Sampling mode is not selected. 1 (1): Sampling mode is selected. |